
Toilet Cistern Parts Replacement in Kings Norton
Kings Norton
The problem
One of our repeat customers in Kings Norton, Birmingham, got back in touch about a toilet cistern that wasn’t flushing properly and had started overflowing. We had installed a Worcester Bosch boiler for them in the past.
What we found
The toilet was around 40 years old. There was a very fine hairline crack in the back of the cistern, so it needed extra care when coming off the wall. The toilet had also been sealed against the wall with silicone, and once the cistern was lifted away, there was quite a bit of dirt and build-up inside. The old overflow pipe had been left running into a hidden area.
The work carried out
- Isolation. We turned off the water supply to the toilet.
- Cutting the seal. We carefully cut through the old silicone seal between the toilet and the wall.
- Removal. We disconnected the water supply and the old overflow pipe, then lifted the cistern away, taking extra care because of the hairline crack.
- Cleaning the cistern. We removed the old fittings and took the cistern downstairs for a thorough wash. The garden hose wasn’t in the best condition, so we improvised to get the water flowing.
- Cleaning the wall. We cleaned the wall behind the toilet, an area that is hard to reach and had built up a lot of dirt.
- New parts. We fitted new cistern fixing bolts, a new flush valve and a bottom entry fill valve.
- Push-button flush. The customer wanted a modern push-button flush in place of the old handle, so that’s what we fitted.
- Internal overflow. With the new flush valve, we replaced the old overflow pipe with an internal overflow, so any excess water now flows safely back into the pan.
- Refitting. We carefully fitted the cistern back into place and connected a new 15mm flexible tap connector.
- Testing. With the water back on, we checked the water level, tested the flush several times and made sure there were no leaks.
Attention to detail
We treat every customer’s home with the same care we’d give our own, and that means taking the time to do things properly. Cleaning the cistern and the wall behind the toilet isn’t something anyone would see once the job is finished, but it’s the difference between fitting new parts and doing a job we are proud of. It’s about the little details and making sure everything is done with care.
Outcome
The toilet now flushes properly, with a modern push-button flush and an internal overflow that sends any excess water safely back into the pan. Everything was working really nicely, and the customer was absolutely delighted with the result.
Frequently asked questions
Why is my toilet cistern overflowing?
An overflowing cistern usually means the fill valve or flush valve is worn and no longer shutting off the water as it should. On this job, the cistern was around 40 years old and had started overflowing, so we replaced both valves. If yours is doing the same, send us photos on WhatsApp and we can advise.
Can you replace the cistern parts without replacing the whole toilet?
Often, yes. On this job we kept the existing toilet and fitted new cistern fixing bolts, a new flush valve, a bottom entry fill valve and a push-button flush. We’ll always tell you what we find and what makes sense for your toilet.
What is an internal overflow?
An internal overflow sends any excess water from the cistern back into the toilet pan, rather than out through a separate overflow pipe. On this job, the old overflow pipe ran into a hidden area, so we changed it to an internal overflow with the new flush valve.
Can I change my old flush handle to a push-button flush?
Yes, in many cases. On this job the customer wanted a modern push-button flush in place of the old handle, and we fitted it as part of the new flush valve.
How do I get a quote, and which areas do you cover?
Send us photos of your toilet and cistern on WhatsApp and we’ll come back to you with a quote. We cover Birmingham and Solihull, including Kings Norton.
Before
After
Why Homeowners Trust Us

Founded on Quality
Every project in our portfolio reflects the same commitment to high standards that MS HEATING AND PLUMBING was built on nearly 30 years ago. We don’t cut corners, and the work we show here is work we’re proud to put our name to.

Clear, Transparent Pricing
Every job starts with an honest, upfront quote so you know exactly what to expect before any work begins. No hidden costs, no surprises when the invoice arrives.

Fully Managed Throughout
Our team handles everything from the first call through to final checks and sign-off. You don’t need to coordinate anything or chase anyone, we take care of it all.

Local Trusted Experts
We’ve been serving homeowners across Birmingham and Solihull for over 29 years. Much of our work comes from repeat customers who recommend us to their neighbours and friends.

Which? Trusted Trader
MS HEATING AND PLUMBING has been independently assessed and approved as a Which? Trusted Trader. It’s an extra layer of reassurance when choosing who to invite into your home.

Gas Safe Registered
All gas work carried out by our team is done by fully Gas Safe registered engineers. Every job meets current safety standards and legal compliance requirements.

Age UK Birmingham Approved
MS HEATING AND PLUMBING is approved by Age UK Birmingham, giving older homeowners and their families added confidence and peace of mind when choosing us for any job.
Contact Us Today
Whatever you need, we are here to help. Get in touch for a free, no-obligation quote.
Get a Free Quote
Fill in the form below and we’ll get back to you shortly.
We’ll do our best to call you at your preferred time. If we’re running slightly off schedule, we’ll still make sure to get in touch as soon as we can.















